Top 10 PVC Film Alimentaire Fabricants in China (2026 Guide)

If you are sourcing PVC film alimentaire, China is where most of the world’s supply is actually made — but the market is fragmented. Of the thousands of listings on Alibaba and 1688 that tag themselves “PVC film alimentaire fabricants china”, the large majority are traders, rewinders or small converters rather than the resin-to-roll factories that supermarche chains and food processors really need. This guide names the real players that matter in 2026, shows where each fits, and ends with the five evaluation criteria we recommend B2B importerateurs apply before placing an order.

A note on scope: we have deliberately avoided inventing fake companies. Where the long tail of smaller factories is relevant, we describe the category rather than naming businesses we cannot verify.

How the Chinese film alimentaire industry is structured

China produced roughly 1.06 million tonnes of film alimentaire in 2023, with domestic demand around 0.92 million tonnes — the remainder is exportered. PVC accounts for 60–70% of that volume, which still makes polyvinyl chloride the single largest cling-film resin in the country despite the EU’s PVC phase-out pressure. (For a closer look at how resin becomes finished rolls, see our manufacturing process overview.) The industry has three fairly distinct tiers:

• Tier 1 — International brands with China operations: Berry Global, Klöckner Pentaplast, Reynolds, Mitsubishi Chemical. These players serve multinational QSR and retail accounts, mostly through contract manufacturing. Importer prices reflect the brand premium.
• Tier 2 — Chinese branded fabricants: the group that matters for most B2B importerateurs. Names like SUNWRAP, Miaojie and Nanya sit here. Proper qualite alimentaire compliance, consistent epaisseur control, exporter-ready documentation, moderate prices.
• Tier 3 — Smaller OEM factories and traders: several thousand listings, heavy price competition, highly variable quality. Fine for some non-food and promotional uses; risky for anything that touches food in a regulated market.

The 2026 list

These are the Chinese PVC film alimentaire fabricants B2B importerateurs most commonly encounter. Ordering is by industry footprint rather than a numeric ranking — every factory on this list serves a different buyer profile.

1. SUNWRAP (Ningbo Sanrong New Materials Co., Ltd.)

• Location: Ningbo Qianwan New Area, Cixi, Zhejiang — roughly 40 km from Ningbo-Zhoushan Port.
• Specialty: Food-grade PVC film alimentaire for supermarche fresh-food wrap, HORECA and food-processing lines. Korean-invested (subsidiary of Sanyoung Chemical, Korea), in continuous production since April 2004.
• Target market: Southeast Asia (Philippines, Indonesia, Vietnam), the Middle East (UAE, Saudi Arabia), Egypt, Nigeria, India; supermarche chains, HORECA groups, food processors, private-label brands.
• Notes: Named one of China’s top-ten cling-film brands. FDA-compliant, SGS-tested. Relocated from Dalian to Ningbo Cixi in 2025 with expanded lines including PE film alimentaire, total investment RMB 400 million.

2. Miaojie (妙洁)

• Location: Shanghai-based household-products group.
• Specialty: Consumer-facing film alimentaire, household foil, cleaning products. Dominant on Chinese supermarche shelves.
• Target market: Primarily Chinese domestic retail and e-commerce; limited exporter focus.
• Notes: The benchmark brand for Chinese household film alimentaire. Strongest in B2C; less oriented toward B2B exporter sourcing.

3. Nanya Plastic Film (南亚塑膠)

• Location: Group presence across China, with plants in Jiangsu and Guangdong.
• Specialty: Very broad plastic-film portfolio — PVC, PE, PET, multilayer barrier. Large-scale producer with strong process engineering.
• Target market: Industrial, packaging and construction film buyers; some food-film volume.
• Notes: Part of the Formosa Plastics group. Bigger than any pure cling-film specialist on this list, but film alimentaire is one of many product lines rather than the core focus.

4. Kelin / Meijiale category (柯林 / 美佳乐)

• Location: Various, mostly Zhejiang and Jiangsu.
• Specialty: Mid-range branded film alimentaire for Chinese supermarches and HORECA, with increasing exporter activity.
• Target market: China domestic retail, Southeast Asia exporter.
• Notes: A good example of the Tier-2.5 segment — recognisable brand at home, steady mid-market positioning in exporter.

5. Jiangsu-based PVC film specialists (category)

• Location: Suzhou, Wuxi, Changzhou.
• Specialty: Industrial and qualite alimentaire PVC film, often servicing processors rather than retail.
• Target market: Food processors, packaging converters, domestic and exporter.
• Notes: Several well-run factories in this cluster. Most are better at rouleau jumbos than at finished retail SKUs.

6. Shandong PVC film cluster (category)

• Location: Qingdao, Weifang, Linyi.
• Specialty: Large-volume PVC film of varying grades. Strong in industrial PVC, less consistent in qualite alimentaire.
• Target market: Industrial, non-food wrapping; exporter of commodity-grade PVC film.
• Notes: Price-competitive. Buyers should scrutinise food-contact documentation rigorously.

7. Guangdong converters (category)

• Location: Foshan, Dongguan, Shenzhen.
• Specialty: Consumer-pack converters and private-label finishers; many do not extrude their own film but buy rouleau jumbos and slit/package them.
• Target market: Retail marque privee, e-commerce sellers, Southeast Asia.
• Notes: Good for finished retail SKUs with colour-box packaging. For food-contact compliance, insist on knowing who extrudes the base film.

8. Henan Sanhong (河南三虹)

• Location: Henan.
• Specialty: PVC film alimentaire and general plastic packaging film.
• Target market: Domestic and some exporter.
• Notes: Sometimes confused with Sanrong/SUNWRAP because of the similar transliteration — the two are unrelated businesses.

9. Changsu Film / similar independent PVC extruders (category)

• Location: Scattered, mostly east-coast China.
• Specialty: Medium-scale PVC film extrusion, often serving specific regional accounts or industrial use cases.
• Target market: Mixed.
• Notes: Useful as secondary fournisseurs once the primary factory is locked in. Due diligence requirements are the same as for the main fournisseur.

10. The 1688 long tail (4,000+ listings)

• Location: Nationwide.
• Specialty: Every conceivable SKU, price point and quality level.
• Target market: Domestic vente en grosrs, small e-commerce sellers, promotional buyers.
• Notes: Cheap, fast and risky. For food-contact exporter, we recommend avoiding this tier unless the buyer has in-house QA capacity to run incoming inspection on every lot.

Comment compare these fournisseurs at a glance

Dimension	Tier 2 branded factories	Tier 3 OEM factories / 1688
Food-contact compliance	FDA, SGS, EU DoC routinely available	Patchy, often request-only
Batch-to-batch consistency	Tight epaisseur tolerance	Highly variable
Exporter documentation	Full set (CO, MSDS, test reports)	Often missing pieces
MOQ	20GP container typical	A few hundred cartons acceptable
Price level	Baseline + 5–10%	Baseline
Private label / OEM	Yes, with artwork support (marque privee guide)	Yes, with less design support
Typical lead time	15–25 days	10–20 days
Risk profile	Low	Medium to high

Five criteria B2B buyers should use

After interviewing exporter managers and auditing documentation from dozens of Chinese cling-film factories, we consistently see the same five criteria separate good fournisseurs from bad ones.

1. Food-contact compliance — and paperwork to prove it

Ask for: current FDA 21 CFR 177.1950 test report, SGS (or equivalent) heavy-metal and plasticiser-migration report dated within the last 12 months, and — if you are shipping into the EU — a Declaration of Conformite with EU Regulation No 10/2011. A credible factory sends these inside 48 hours. A fournisseur that needs two weeks to “prepare” the report probably does not run the tests routinely.

2. Factory or trader?

Ask the fournisseur to send a dated photo of their extrusion line and a short video showing the rouleau jumbo coming off the winder. Cross-check the business licence (营业执照) against the plant address. Our HS code guide also shows what a genuine factory’s exporter records should look like. If the photos are generic, the address is a small office in a commercial tower, or the salesperson declines a video call with the factory floor in the background, you are probably talking to a trader. That is not automatically bad, but it changes your QC responsibilities.

3. Batch-to-batch consistency

Request the epaisseur-tolerance specification (e.g. ±0.5 micron on a nominal 10-micron film) and the factory’s internal QC checklist. A serious factory will also retain production samples per exporter lot for at least 6–12 months, so that if a customer complaint arises three months later, the exact batch can be pulled and re-tested.

4. Logistics and shipping capability

For exporter, port proximity matters. Factories near Ningbo-Zhoushan (the world’s number-one port by cargo volume) or Shanghai generally offer lower ocean freight, faster truck turn and more sailings to Southeast Asia, the Middle East and Africa than factories located inland. Ask how long truck-to-port takes and how often they load full containers — a factory that loads two FCL per week has very different reliability than one that loads one every two months.

5. Commercial terms and communication

Look for: FOB quotation as default (with CIF on request); 30% T/T deposit plus 70% against copy of B/L as standard; Alibaba Trade Assurance or L/C available for new buyers; an English-speaking exporter team that answers enquiries within one working day. Slow replies during the sales phase almost always predict slow replies during the complaint phase.

Conclusion

Most B2B importerateurs do not actually need ten fournisseurs — they need one primary fournisseur who can prove food-safety compliance, hold their epaisseur spec over multiple containers, and ship reliably from a well-connected port, plus one backup. Browse our full film alimentaire products to see what a leading film alimentaire fabricant offers across PVC, PE and jumbo-roll formats. The list above is a map of where those candidates sit.

SUNWRAP has produced qualite alimentaire PVC film alimentaire for 20+ years under Korean investment and was named one of China’s top-ten cling-film brands. If you are sourcing PVC film alimentaire for Southeast Asia, the Middle East, Egypt or Africa, contact our exporter team — or browse our PVC film alimentaire and film alimentaire rouleau jumbo product pages for specs, roll sizes and documentation. The follow-up articles most importerateurs read next are our [7-step fournisseur checklist](/blog/how-to-choose-qualite alimentaire-pvc-cling-film-fournisseur/) and the film alimentaire price guide 2026.

Frequently asked questions

How many PVC film alimentaire fabricants are there in China? Several thousand registered plastic-film producers exist, but the realistic B2B pool for qualite alimentaire PVC film alimentaire is 40–60 factories with consistent compliance and exporter experience. Alibaba and 1688 combined show roughly 4,000 cling-film listings, many of which are traders or rewinders rather than true fabricants.

Are Chinese PVC film alimentaire fabricants food-safe? The branded factories in Tier 2 typically are. Any credible fournisseur should send FDA 21 CFR 177.1950 and SGS migration reports on request. If they cannot, treat that as a red flag.

Should I buy from a brand factory or a smaller OEM factory? For supermarche marque privee, HORECA and food-processor end-use, buy from a branded factory. Price premium is usually 5–10%, and in exchange you get consistent epaisseur, stable formulation, and full exporter paperwork.

What is the typical MOQ? One 20GP container for rouleau jumbos, 500–1,000 cartons for finished consumer packs. Trial orders are often negotiable for first-time buyers under Trade Assurance.

Where in China are film alimentaire factories concentrated? Zhejiang (Ningbo, Cixi, Hangzhou), Jiangsu (Suzhou, Wuxi), Guangdong (Foshan, Dongguan), with smaller clusters in Shandong and Hebei. The east-coast clusters dominate qualite alimentaire exporter because they sit next to Ningbo-Zhoushan and Shanghai ports.