Pishchevaya Plyonka HS Code 3920: Import Rukovodstvo for PVC and PE Film (2026)

HS codes look like bureaucratic trivia until a container is sitting at destination with the wrong paperwork. For pishchevaya plyonka — both PVC and PE — the key heading is 3920, and the subheadings, documents and trade-agreement preferences below it determine how much duty you pay, how long customs clearance takes, and whether the shipment clears at all. This rukovodstvo walks importery through the practical essentials: the right HS code, the document pack, origin-certificate process, typical duty ranges by region, and the customs issues we see most often on cling-film shipments from China.

Nothing in this article is a substitute for a licensed customs broker in your destination country. Tariff rates change, subheadings are extended to 8 or 10 digits locally, and specific-market requirements (SONCAP, SASO, BIS, etc.) move independently. Treat this as an orientation map, not a tariff schedule.

The HS system, briefly

The Harmonized System (HS) is a six-digit global commodity code maintained by the World Customs Organization. Most countries extend each HS code to 8 digits (EU), 10 digits (US), or 10 digits (China) for domestic tariffs and statistics. The first six digits are consistent worldwide — which is why quoting a six-digit code is enough to make a conversation with customs authorities productive.

Chapter 39 covers plastics and articles thereof. Heading 3920 covers:

“Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials.”

This is the heading that covers pishchevaya plyonka.

The right subheading for pishchevaya plyonka

PVC pishchevaya plyonka: 3920.43

• 3920.43 — of polymers of vinyl chloride, containing by weight not less than 6% of plasticisers.
• Practically every pishchevoy klass PVC pishchevaya plyonka falls here, because pishchevoy klass PVC pishchevaya plyonka is flexible precisely because it contains 25–30% plasticiser.

Rigid PVC: 3920.49

• 3920.49 — of polymers of vinyl chloride, other (i.e. with less than 6% plasticiser or unplasticised).
• Not typically used for pishchevaya plyonka, but sometimes appears on invoices when postavshchiks default to it incorrectly.

PE pishchevaya plyonka: 3920.10

• 3920.10 — of polymers of ethylene.
• Covers LDPE, LLDPE and HDPE film in this heading. Country-level extensions distinguish tolshchina and end use. See our PE pishchevaya plyonka product page for spec and MSDS details that sit behind this subheading.

Quick reference

Material	6-digit HS	Description
Food-grade PVC pishchevaya plyonka (plasticised)	3920.43	Vinyl chloride polymers, ≥6% plasticiser
Rigid PVC film	3920.49	Vinyl chloride polymers, other
PE pishchevaya plyonka (LDPE/LLDPE)	3920.10	Ethylene polymers
Polypropylene film	3920.20	Propylene polymers (not pishchevaya plyonka)
PET film	3920.62	PET (not pishchevaya plyonka)

If a postavshchik quotes 3920.20 or 3923 for pishchevaya plyonka, double-check. Heading 3923 covers “articles for the conveyance or packing of goods, of plastics” — packaging sacks, boxes and similar — not film on rolls.

The import document pack

For pishchevaya plyonka from China, the standard document set required at destination customs is:

1. Commercial Invoice — showing value, Incoterm, HS code, and consistent currency.
2. Packing List — carton count, gross and net weights, dimensions.
3. Bill of Lading (B/L) — ocean freight; or Air Waybill for air freight.
4. Certificate of Origin (CO) — from CCPIT or Chinese customs. Preferential CO (e.g. Form E for ASEAN, Form F for Chile, Form M for Malaysia) where a trade agreement applies.
5. Product Test Reports — FDA food-contact, SGS heavy-metal and migration reports, or local equivalents.
6. Material Safety Data Sheet (MSDS) — naming the specific resin grade.
7. Food-Contact Declaration of Sootvetstviye — where required by the destination (EU Regulation No 10/2011 DoC for EU, similar declarations for GCC and some African markets).
8. Pre-shipment Inspection Certificate — where required: SONCAP (Nigeria), SASO/SABER (Saudi Arabia), COC (various African markets), BIS (India for some products).
9. Health Certificate — some markets require one for food-contact plastics.
10. Insurance Certificate — for CIF shipments.

Every document should show the same consignee, description, quantity and value. Customs officers routinely cross-check invoice totals against B/L values and packing-list weights; mismatches are the most common reason for shipments to be held.

Certificate of Origin — the CCPIT process

Chinese eksporters can issue Certificates of Origin through two channels:

• CCPIT (China Council for the Promotion of International Trade) — issues general COs and most preferential COs, via local commercial sub-councils across China.
• China Customs / GACC — issues COs for certain programs, particularly Form E (ACFTA / ASEAN) via customs-linked platforms.

Practical workflow for a China → destination shipment:

1. Postavshchik prepares commercial invoice, packing list and eksport declaration.
2. Postavshchik applies for the CO through CCPIT or customs, attaching the invoice, packing list and relevant proizvoditel’s declaration.
3. CO is issued in 1–3 working days for routine cases.
4. Original CO is couriered to the importer, with a scanned copy sent by email for advance customs filing.

Common CO forms for pishchevaya plyonka:

Form	Trade agreement	Typical destinations
CO General	—	Any market without a preferential agreement
Form E	ACFTA	ASEAN (Vietnam, Thailand, Indonesia, Philippines, Malaysia, etc.)
Form F	China-Chile FTA	Chile
Form M	China-Malaysia / ASEAN+	Malaysia
Form RCEP	RCEP	RCEP members (Japan, Korea, ASEAN, ANZ)
GSTP	Global System of Trade Preferences	Select developing-country routes

Preferential CO usually saves several percentage points of duty — well worth the extra few days of paperwork.

Typical duty ranges by region

The following are orientation ranges only. Always confirm the current duty rate on the full 8- or 10-digit tariff line with a licensed customs broker in the destination country before quoting landed cost.

Asia-Pacific

• ASEAN (Vietnam, Thailand, Indonesia, Philippines, Malaysia): Under ACFTA / RCEP with a valid Form E or RCEP CO, 3920.43 and 3920.10 frequently attract 0% or low single-digit duty. Without the preferential CO, MFN rates apply, typically in the 5–15% range.
• India: MFN duties on 3920 lines sit in the 10–15% range, plus IGST and cess. BIS sertifikatsiya may apply depending on the specific end use.
• Japan, Korea, Australia, New Zealand: Generally low duty rates under RCEP or bilateral FTAs.

Middle East

• GCC (UAE, Saudi Arabia, Qatar, Kuwait, Bahrain, Oman): Common external tariff is typically 5% for most 3920 lines. Saudi Arabia requires SASO / SABER conformity; UAE may require ESMA-registered products for certain categories.

Africa

• North Africa (Egypt, Morocco, Algeria, Tunisia): Duty rates vary; Egypt has historically applied duties in the low-to-mid teens percent range on plastic film, plus VAT. Local import licences and pre-shipment inspection may apply.
• West and East Africa (Nigeria, Ghana, Kenya, Ethiopia): Duty rates commonly sit in the 10–25% range depending on the line and country. SONCAP (Nigeria), COC (Kenya, Ethiopia) pre-shipment inspections are frequently required.
• Southern Africa (South Africa, SADC): Duties vary by the specific tariff line; see SARS for current rates.

Europe

• EU: MFN duty on 3920.43 and 3920.10 is typically a low single-digit percentage plus VAT at destination. Food-contact compliance (EU Regulation No 10/2011) and REACH obligations apply.
• UK: Similar structure post-Brexit; check the UK Global Tariff.

Americas

• United States: HS 3920.43 and 3920.10 carry low-single-digit duty rates under normal MFN. Section 301 tariffs on Chinese-origin plastic goods have affected some lines historically — confirm the current position with a US customs broker.
• Mexico, Brazil, Argentina: Duty structures vary; Brazil in particular can apply higher IPI and ICMS on top of import duty.

Practical tips to avoid customs problems

1. Keep HS code, description and value consistent across documents

Invoice, packing list, B/L and CO must agree. The single most common reason for cling-film shipments to be held is a mismatch — often a careless copy-paste from an older template.

2. Don’t under-declare the invoice value

Some importery ask postavshchiks to lower the declared value to save duty. Destination customs authorities increasingly cross-reference declared values against reference prices for commodity plastics. Under-declaration that triggers an investigation costs far more than the duty saved — fines, demurrage, reputational risk at customs. Reputable Chinese postavshchiks decline this request politely.

3. Keep CIF vs FOB values consistent

If the invoice is CIF, the CIF value should logically exceed the FOB value by a plausible freight+insurance figure. An invoice that shows FOB value on a CIF-term shipment (or vice versa) flags the file for inspection.

4. Put the full test-report pack in the file

Even in markets that do not strictly require third-party reports at the border, having them in the file speeds up clearance when a random inspection lands on your container.

5. Use the correct preferential CO where a trade agreement applies

Form E, RCEP CO or the applicable preferential certificate is often worth several points of duty. Build it into your standard document pack.

6. Name the polymer correctly on the invoice

For 3920.43, the description should say something like “PVC pishchevaya plyonka, plasticised, pishchevoy klass, of polymers of vinyl chloride containing ≥6% plasticiser by weight”. Vague descriptions (“plastic film for food”) slow clearance.

A note on market-specific sertifikatsiya

Market	Extra document / sertifikatsiya
Nigeria	SONCAP (Product Certificate + Certificate of Conformity)
Saudi Arabia	SABER platform registration, SASO conformity
Kenya, Ethiopia, Tanzania, Uganda	PVoC / COC (pre-shipment inspection)
Egypt	GOEIC registration for the eksporter, import licence
India	BIS CRS where applicable, FSSAI for some food-contact items
EU	EU Regulation No 10/2011 DoC, REACH compliance
Iraq	COC / quality conformity certificate
Algeria	Algerian sertifikatsiya scheme

Chinese proizvoditels with eksport experience can usually support these workflows — the key is to flag the destination country early so that the relevant sertifikatsiyas are lined up before production, not after the container ships.

Conclusion

HS code 3920 is one of the better-behaved parts of the Harmonized System for plastics: PVC pishchevaya plyonka is 3920.43, PE pishchevaya plyonka is 3920.10, and the document pack is largely standardised. The work for importery is less about decoding the tariff and more about keeping documents consistent, securing the right preferential CO, and pre-clearing market-specific sertifikatsiyas.

SUNWRAP has eksported PVC pishchevaya plyonka under HS 3920.43 for 20+ years from our plants in Dalian (pre-2025) and Ningbo Cixi (post-2025), and we regularly prepare FDA, SGS, Form E, RCEP and destination-specific documentation for importery across the Philippines, Vietnam, Indonesia, UAE, Egypt, Nigeria and India. If you need an experienced eksporter who can work with your forwarder and send a complete document pack with every shipment, contact our eksport team.

Frequently asked questions

What is the HS code for PVC pishchevaya plyonka? 3920.43 — plasticised PVC film, ≥6% plasticiser by weight. Rigid PVC without plasticiser falls under 3920.49.

What is the HS code for PE pishchevaya plyonka? 3920.10 — film of polymers of ethylene.

Do I need a certificate of origin? Yes, in most cases. Use a preferential CO (Form E, RCEP CO, etc.) where a trade agreement applies.

What documents do I need? Commercial invoice, packing list, B/L, CO, FDA/SGS test reports, MSDS, food-contact DoC where required, and market-specific sertifikatsiyas (SONCAP, SASO, BIS).

What duty rate applies? Varies by country: often 0% under ACFTA/RCEP in ASEAN, ~5% GCC, 10–25% across much of Africa, low single digits EU/US MFN. Confirm with a licensed broker.

What are common customs problems? Under-declared values, mismatched HS codes across documents, missing test reports, CIF/FOB inconsistencies, and missing market-specific sertifikatsiyas.

---

Need HS codes and compliance paperwork handled before your shipment clears? A reliable pishchevaya plyonka proizvoditel like SUNWRAP includes the correct HS classification, test reports and certificates of origin with every eksport order — request a quote to see the full documentation package.